| DESCRIPTION |
| THIROCO Plastic Cement is a professional multipurpose asphalt product. It is mainly used to fill cracks, holes and repair deteriorated areas on foundations and asphalt roofs, shingle, maximum and chimney joints. It is durable, flexible, waterproof, sun proof and acid resistant. Can be use to glue back asphalt shingles and protect them against wind. |
| Application |
Do not apply if showers are forecast. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants.
Apply with a trowel, a putty knife or a caulking gun or by hand with glove.
To repair joints and cracks, deeply fill gaps and leave an excess at the surface to avoid water accumulation. To glue back shingles, apply only 3 points of about 25 mm ( 1 inch) at equal distances.Close container after each use. Temper product to ease application in cold weather.
Clean tools and equipment with mineral spirits. |
| Packaging |
| Available in 13.6kg and 20kg. |
| STANDARD |
| CAN/O.N.G.C. 37.5M-89 |
| SHELF LIFE |
| 12 months after purchasing date when kept in its tightly closed original container. |
| note |
| The use of this product in specific purposes is left at user’s discretion. For more information, contact the manufacturer. If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid solvent infiltration inside. Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. Keep away from open flames, sparks or heat sources. Do not smoke. For EXTERIOR USES only. |
