Paqco
Paqco™ P-2000 All Seasons Plastic Cement
Uses
P-2000 is a product of asphalt of professional selection for multiple purposes. We use it mainly to block cracks and holes on the foundations and asphalt roofs, on solins of shingles, vent and chimney joints. It is long-lasting to water, sun and acid. Its gelatinous consistency allows an easy application in cold season. Do not sink on vertical surfaces. It can be used on dry or wet surfaces.
DIRECTION
Clean the surface so that it is clean and exempt from any foreign materials. To ease application in cold season, keep the product in a warm place. Apply with a trowel, a putty knife or with a glove. Close the pail after every use. Clean tools and equipment with some mineral spirit. EXTERIOR USE ONLY.
PACKAGE
Offers in pail of 12 kg and 20 kg
Norm
CAN/O.N.G.C. 37.5M-89
SHELF LIFE
This product can be kept in its original container, hermetically closed for 1 year from date of purchase.
NOTE
If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid solvent infiltration inside. Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. keep away from open flames, sparks or heat sources. Do not smoke.
Paqco
Paqco

Technical Data Table

Color Black
Solids by Volume 70 %
Weight 1,17 kg/L (9,8 pounds/gal)
Coverage 0,3 m²/kg (3,2 ft²/kg) per coat 3 mm (1/8 in)
Dry Time*

To 50 % H.R. 20° C (68° F)

To the Touch* ± 4 hours
Completely Dry* ± 48 hours
Service Temperature Maximum : 85° C (185° F) dry coating
Application Temperature Ambient (Thickens at low temperature)
Chemical Resistance Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Is not resistant to oils, greases and solvents.
Permeance to Water Vapor (ASTM E96) 3 mm (1/8 in) coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

*Dry Time dependent of surface porosity and temperature.

Warranty

The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

 

Trowel
Glove
Knife
Warning Simdut

Harmful and flammable liquid and vapors

Contains petroleum distillates. May cause dizziness, headache or nausea. May cause nose, throat, eyes and skin irritation. Keep away from heat sources, sparks and flames. Use only with adequate ventilation. Do not breathe vapors. Wear safety glasses and appropriate gloves.

FIRST AID: Eyes : In case of contact, flush immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water. If you experience difficulty in breathing, leave the area to obtain fresh air. If difficulties continues, get medical assistance immediately. If swallowed, do not induce vomiting. Get medical attention immediately.

KEEP OUT OF REACH OF CHILDREN READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 

PDFDownload PDF file format