Paqco
Paqco™ P-20 Plastic Cement
Uses
P-20 Plastic Cement is used to fill cracks and holes on foundations and asphalt roofs, on shingle, vent and chimney flashings, etc. It seals leaks and maintains watertightness. Can be use to glue back asphalt shingles and protect them against wind.
DIRECTION
Surface must be sound, clean and free of all loose or foreign materials. Avoid use if rain is foreseen. In cold season, keep product in a warm place. Apply product with a trowel, a putty knife or with a caulking gun. Close container after each use. Clean tools and equipment with mineral spirits. EXTERIOR USE ONLY.
PACKAGE
Offer in 300ml, 1kg, 4kg,12kg and 20kg
Norm
CAN/O.N.G.C. 37.5M-89
SHELF LIFE
This product can be kept in its original container, hermetically closed for 1 year from date of purchase.
note
If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid solvent infiltration inside. Protect new work from open flames and adjacent welding activity. Contains petroleum distillates; keep out of reach of children. keep away from open flames, sparks or heat sources. Do not smoke.
Paqco
Paqco

Technical Data Table

Color Noir
Solids by Volume 70 to 80 %
Weight 1,21 kg/L (10,1 pound/gal)
Coverage

0,32 m²/kg (3,45 ft²/kg) for 3 mm (1/8 in) coat
Tube : bead of 3 mm (1/8 in) couvers ± 25 feet
Dry Time*

To 50 % H.R. 20° C (68° F)
To the Touch* ± 4 hours
Completely Dry* ± 48 hours
Service Temperature Maximum : 85° C (185° F) dry coating
Application Temperature 10° C (50° F) and more
Chemical Resistance Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Is not resistant to oils, greases and solvents.
Permeance to Water Vapor (ASTM E96) 3 mm (1/8 in) coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

*Dry Time dependent of surface porosity and temperature.

 

Warranty

The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.
Trowel Gun
Glove		 Knife
Warning Simdut

Harmful and flammable liquid and vapors

Contains petroleum distillates. May cause dizziness, headache or nausea. May cause nose, throat, eyes and skin irritation. Keep away from heat sources, sparks and flames. Use only with adequate ventilation. Do not breathe vapors. Wear safety glasses and appropriate gloves.

FIRST AID: Eyes : In case of contact, flush immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water. If you experience difficulty in breathing, leave the area to obtain fresh air. If difficulties continues, get medical assistance immediately. If swallowed, do not induce vomiting. Get medical attention immediately.

KEEP OUT OF REACH OF CHILDREN READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 

PDFDownload PDF file format