Antirouille Force1
Oil Force1™ Permanant Oil Rust Proofing
Description

Force 1 rust inhibitor is a quality coating for the control of corrosion. Made of specialized oils and rust inhibitors which give high rust protection, it release a pleasant smell during the application.

It protects the metal surfaces constantly exposed to humidity and to the corrosive vapors. We use it mainly used for automotive, industrial and agricultural applications.

Easy of apply, its liquid consistency allows it to scatter in cracks and other confined places where the water could go or stay and cause damages. In moderated application, it forms a thin protective film that stays in place once dry. Used on internal
surfaces, this rust inhibitor offers an effective protection which can go to 10 years. Amber tint, it is designed to be use where aesthetics is required.
Surface Preparation

Use a degreaser to eliminate all dirt and be sure that the surface is free of oil, frost, dust, chipped paint, humidity, rust and any loose or deteriorated materials that could affect bounding.

Application
Never apply on fibreglass or polymer that has not previously been coated with a primer at the factory. Stir well before use. As soon as the surface is clean and dry, apply in thin coats of 5 mils (1/16 inch.) minimum as fast as possible by spray or with a paintbrush. Take necessary precautions for your protection and for the cleanliness of places during the application.
Clean Up
Clean tools and equipment with mineral spirits.

Package
Available in 4L, 19,9 L 60 L and 205 L
Shelf Life
12 months after purchasing date when kept in its tightly closed original container. Store shielded away from the sun to avoid the product’s oxydation.
Warning
Never apply on fibreglass or polymer that has not previously been coated with a primer at the factory. Stir well before use.
 
Antirouille Force1
Antirouille Force1

Technical Data Table
  Classic Force1
Appearence Amber liquid
Solids by Volume 75 % to 85 %
Weight 1,21 (about) kg/L
Coverage 2 m²/L (about) by coat de 1/32 in
Dry Time

at 50 % H.R. 20° C (68° F)
Dry to the touch 5 hours (approx)
Service Temperature Maximum : 85° C (185° F) Dry coating
Caracteristics
  • Permanent Rust
  • Proofing for new and old vehicles
  • Long Lasting
  • Protective coating
  • Film that never dries
  • Dripless
Permeance to Water Vapor (ASTM E96) 3 mm (1/8 in) coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Dry Time dependent of surface porosity and temperature.

Restrictions

Avoid use where the smell of solvents may damage the food and other fragile products. To ease the application during the winter, keep the product in a cool place. Store away from sunlight to prevent premature oxidation of product.

Warranty

The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

 
Warning Simdut

Harmful and flammable liquid and vapors

Contains petroleum distillates. May cause dizziness, headache or nausea. May cause nose, throat, eyes and skin irritation. Keep away from heat sources, sparks and flames. Use only with adequate ventilation. Do not breathe vapors. Wear safety glasses and appropriate gloves.

FIRST AID: Eyes : In case of contact, flush immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water. If you experience difficulty in breathing, leave the area to obtain fresh air. If difficulties continues, get medical assistance immediately. If swallowed, do not induce vomiting. Get medical attention immediately.

KEEP OUT OF REACH OF CHILDREN READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 

PDFDownload PDF file format

x