| Description |
Sealflex rust inhibitor is a quality coating for the control of corrosion. Made of a special mix of products which give excellent inhibitive rust protection, it release a pleasant smell during the application. It protects the metal surfaces constantly exposed to humidity and to the corrosive vapors. We use it mainly used for automotive, industrial and agricultural applications. Easy of apply, its gelatinous consistency allows it to scatter in cracks and other confined places where the water could go or stay and cause damages. Once dried, it forms a protective film that won’t leak. Used on internal surfaces, this rust inhibitor offers an effective protection which can go to 2 years. Black colored, it is designed for general use.
|
| Surface Preparation
|
Use a degreaser to eliminate all dirt and be sure that the surface is free of oil, frost, dust, chipped paint, humidity, rust and any loose or deteriorated materials that could affect bounding.
|
| Application |
| Never apply on fibreglass or polymer that has not previously been coated with a primer at the factory. Stir well before use. As soon as the surface is clean and dry, apply in thin coats of 5 mils (1/16 inch.) minimum as fast as possible by spray or with a paintbrush. Take necessary precautions for your protection and for the cleanliness of places during the application.
|
| Clean Up
|
| Clean tools and equipment with mineral spirits.
|
| Package
|
| Available in 4L, 19,9 L
60 L and 205 L |
| Shelf Life
|
| 12 months after purchasing date when kept in its tightly closed original container. Store shielded away from the sun to avoid the product’s oxydation.
|
| Warning
|
| Never apply on fibreglass or polymer that has not previously been coated with a primer at the factory. Stir well before use.
|
| |
