| Description |
The Concrete Sealer is a transparent coating specially designed for Tacky Crete. The acrylic resin is a water-based thermoplastic polymer with a milky appearance. Once dry, it becomes translucent and protects the Tacky Crete while keeping is properties thereof. In addition of being waterproof, it is flexible, non-toxic, odorless, durable and very tolerant at extreme temperatures. Its special composition offers a long-term protection, penetrating and sealing surfaces. It can also be very useful
as a curing membrane for fresh concrete inside and outside to mineral surfaces such as concrete and masonry. It is recommended to apply a new coat every 5 years. |
| Benefits |
Excellent adhesion properties
Keep all good properties even once dried
Non-toxic and odourless
Good UV resistance
Good wear resistance |
| Surface Preparation |
Do not use if showers are forecast for the next 24 hours after application.
Surface must be clean, dry and free from dust, dirt, rust, oil, grease, scale and other contaminants. |
| Application |
For complete drying, the product needs a temperature above 10 ° c during the time of installation and for at least a few hours. The sealant should be applied when the initial set of Tacky Crete is completed. That means approximately two hours after installation. This delay is dependent of humidity and ambient air. You must give 2 coats for a good protection. When used as a curing membrane, apply 2 coats as soon as the initial set of concrete is done. Wait about 20 minutes between coats. Mixed well before each application. Apply by spray, brush or roller. Let dry and harden before allowing moving furniture or putting in place. Protect the surface against the weather until dry. |
| Cleaning |
| Clean tools and equipment with soap and water during the product is still fresh. |
Coverage |
| 22.7 kg cover from 14 m² to 28 m² (150 to 300 ft²) at 3 mm (1/8 inch) thickness. Coverage rate is dependent of the surface porosity, application method, surface condition and worker abilites. |
| Storage |
| Keep from freezing. It can be stored in original container, tightly closed, for 1 year from date of purchase. |
| Packaging |
| Size available: 3.78L, 10L |
| Property physical |
- Appearance: clear liquid,
- Viscosity: 500mpas-Water
- Retention: type 1: in accordance with ASTM C-309
|
| Covering |
Smooth: 1L covers 7.5 m² to 12.5 m²
Rough: 1L covers 3 m² to 4 m² The coverage may vary depending on the method of application, porosity and surface temperature. |
| rESTRICTIONs |
| Do not apply over wet surfaces. Do not apply when it may rain or dew until completely dry |
