All surfaces to be covered shall be structurally sound, clean and free from traces of dust, oil, grease, wax, paint, curing agent, coatings and loose particles. They must also be exempt from any trace or presence of acids, concentrated alkalis, chemical cleaning agent or any other material that could reduce adhesion.

The only recommended wood substrate for floors is new exterior grade plywood installed on interior floor in dry areas.

All concrete substrates shall be completely cured and at least 28 days old. They must be roughened for better adhesion.

Ambient surface and product temperature must be superior than 10ºC (50ºF) and lower than 35ºC (95ºF) during application and for the first hour.

Shake well before use. Eagle Patch Plus is ready to use; do not dilute.

In a clean container, pour exactly 380 ml per kilogram of Eagle Patch Plus and gradually add Eagle Patch powder while mixing with a low-speed drill and a mixer.

Blend for 1 to 2 minutes scraping recipient walls and paddle to obtain a homogeneous trowelable consistency.

Spread immediately to the desired texture and finish.

Mix portion of product that can be applied in less than 15 minutes.

Clean working tools and hands with water while product is still fresh.

Entreposer dans un endroit frais et sec. Craint le gel. La durée de vie est de 12 mois dans les contenants originaux non-ouverts.