| Description |
| This aluminum asphalt based fibered asbestos free coating with special resins gives, once dry, a reflective, glossy and durable finish. That reduces temperature absorption and delays supports contraction and dilatation. It protects surfaces against UV and oxidation. This product is used as a reflective and decorative coating for roofs, flashings, utility buildings, facings, sidings and metal structures. This paint is also used on dry protection coverings or on any other stable bituminous coating (recommended with CR-300 and CR340), as well as coal tar coatings and flashing. It can also be applied on metal surfaces which have a very dry coat of primer or paint. Can also be used as a protection coating for spayed polyurethane insulation. |
| Surface Preparation |
Avoid use if showers are foreseen. Surfaces must be structurally sound, clean, dry and free of dust, dirt, rust, oil, grease, flakes and other contaminants. Applied paints and coatings must be in good condition and strongly adhered. Previously, fill holes, cracks and week spots with an appropriate Condor Plastic Cement. |
| Application |
Stir product well before use. To ease application in cold season, keep product in a warm place. Apply with a squeegee, a brush, a roller or a paintbrush. Avoid over-brushing. First, apply a coat on overlaps and nails; than, apply a coat uniformly all over the surface. |
| Clean up |
| Clean tools and equipment with mineral spirits. |
| Package |
| Available in 3.78L and 18,9L format. |
| NORME |
| CAN/O.N.G.C. 37.42-M89 type II |
| Shelf Life |
| 12 months after purchasing date when kept in its tightly closed original container. |
