| Description |
| This rubberized and fibered aluminum coating is formulated with asphalt, selected specialty resins, fibers and a large quantity of aluminum powder that confers excellent characteristics such as flexibility, weather resistance and sun reflection. This product gives, once dry, a reflective, glossy and durable finish that protects surfaces against UV and oxidation. It is used for roofs, flashings, utility buildings, facings, sidings and metal structures. This fibered paint is also perfect to patch and fill cracks and screw heads. We recommend CR-390 in combination with Condor’s Flex line products. |
| Surface Preparation |
Avoid application if showers are foreseen. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants. Previously fill holes, cracks and weak spots with CONDOR’s Rubberized Plastic Cement CR320. |
| Application |
Stir product well before use. Apply with a squeegee, a brush, a roller or a paintbrush. Avoid over-brushing. First, apply a coat on overlaps and nails; than, apply a coat uniformly over all the surface. To ease application in cold season, keep product in a warm place. |
| Clean up |
| Clean tools and equipment with mineral spirits. |
| Package |
| Available in 18,9L format. |
| NORME |
| CAN/O.N.G.C. 37.42-M89 type II |
| Shelf Life |
| 12 months after purchasing date when kept in its tightly closed original container. |
|
|
Technical Data Table |
| |
Specifications |
| Color |
Aluminium |
| Solids by Volume |
60 to 70 % |
| Weight |
1,0 kg/L (8,3 pounds/gal) |
| Coverage |
1,0 to 2,25 L/m² (2 to 4,5 gal/100 ft²) |
| Dry Time* |
To 50 % R.H. 20° C (68° F) |
| To the Touch*
|
4 to 8 hours |
| Completely Dry* |
48 à 72 hours |
| Service Temperature |
-30° C à 80° C (-22° F à 176° F) |
| Application Temperature |
Can be applied at low temperature but preferably above 10° C (50° F). |
| Chemical Resistance
|
Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Is not resistant to oils, greases and solvents. |
| Permeance to Water Vapor (ASTM E96) |
3 mm (1/8 in) coat before drying 2.9 ng/Pa.m2.s (0.05 perms) |
|
* Dry Time dependent of surface porosity and temperature.
|
| |
| Restrictions
Avoid contact with polystyrene insulation foam or any solvent alterable materials. If product is applied near a ventilation unit or an air conditioner, take necessary precautions to avoid solvent infiltration inside. It is not recommended on bare wood or on porous surfaces. Make sure that bituminous surfaces or coal tar coatings are stable, completely dry and free of volatile residues. This product may change color in aluminum oxidizing environments. Do not apply if showers are foreseen or if there is a possibility of dew point before it is completely dry because humidity can tarnish freshly applied coating. Do not apply on wet surfaces. Protect freshly applied product and open container from open flame and adjacent welding activity. For EXTERIOR USE ONLY.
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant. |
|
| Warning |
 |
|
Harmful and flammable liquid and vapors
Contains petroleum distillates. May cause dizziness, headache or nausea. May cause nose, throat, eyes and skin irritation. Keep away from heat sources, sparks and flames. Use only with adequate ventilation. Do not breathe vapors. Wear safety glasses and appropriate gloves.
FIRST AID: Eyes : In case of contact, flush immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water. If you experience difficulty in breathing, leave the area to obtain fresh air. If difficulties continues, get medical assistance immediately. If swallowed, do not induce vomiting. Get medical attention immediately.
KEEP OUT OF REACH OF CHILDREN READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT
|
|
|
