Condor
CR-30 Non-Fiber And Resaturating Roof Coating Condor™
Description
CR30 is a non-fiber coating used on roofs. It is formulated to waterproof concrete, wood, masonry and asphalt roofs. It doesn’t react to low temperatures and humidity. Doesn’t leak ones dried. It serves as a protecting coat on low-sloped roofs or on roofs retaining water. It can also be used to resaturate asphalt and felt roofs. It regenerates deteriorated surfaces. Improves service life of roofs.
Surface Preparation

Avoid use if showers are foreseen. Surfaces must be sound, clean and free of dust, dirt, rust, oil, grease, chipped paint, frost or any other contaminants. Previously fill holes, cracks and weak spots with Condor CR-20 and CR-25 Plastic Cement.

Application

Stir well before use. Apply in uniform coat with a squeegee, a brush, a roller or spray gun. To ease application during cold season, keep product in a warm place.

Clean up
Clean tools and equipment with mineral spirits.
Package
Available in 3,78 l, and 18,9 l. Also in 205 L or vrac.
NORME
CAN/O.N.G.C. 37-GP-6MA
Shelf Life
12 months after purchasing date when kept in its tightly closed original container.
Condor
Condor

Technical Data Table

  Specifications
Color Black
Solids by Volume 65 to 75%
Weight 0,93 kg/L (7,75 pounds/gal)
Coverage 1 to 2 L /m² (2 to 4 gal/100 ft²) per coat (1/8 in)
Dry Time*

To 50 % R.H. 20° C (68° F)

To the Touch* 4 hours
Completely Dry* 48 hours
Service Temperature - 30° C à 95° C (- 22° F à 203° F)
Application Temperature Can be applied at low temperature but preferably above 10° C (50° F). Thickens at low temperature.
Chemical Resistance

Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Is not resistant to oils, greases and solvents.

Permeance to Water Vapor (ASTM E96) 3 mm (1/8 in) coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Dry Time dependent of surface porosity and temperature.

Restrictions

If product is applied near a ventillation unit of or an air conditioner, take necessary precautions to avoid solvent infiltration inside. Protect freshly applied product and open container from open flame and adjacent welding activity. For EXTERIOR USE only.

Warranty

The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

BrushScraper Sprayer
Paintbrush
Roller
Warning Simdut

Harmful and flammable liquid and vapors

Contains petroleum distillates. May cause dizziness, headache or nausea. May cause nose, throat, eyes and skin irritation. Keep away from heat sources, sparks and flames. Use only with adequate ventilation. Do not breathe vapors. Wear safety glasses and appropriate gloves.

FIRST AID: Eyes : In case of contact, flush immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water. If you experience difficulty in breathing, leave the area to obtain fresh air. If difficulties continues, get medical assistance immediately. If swallowed, do not induce vomiting. Get medical attention immediately.

KEEP OUT OF REACH OF CHILDREN READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 

PDFDownload PDF file format