| Description |
| Prestige Primer is a very efficient high performance fast drying water-based primer. It is used as an interior or exterior undercoat preparation for Prestige. CR2300 adheres over well prepared concrete, wood, fiber glass, styrofoam panels and metal surfaces. |
| Surface Preparation |
| It is very important to clean all surfaces with a universal degreaser, to brush and rinse with plenty of water (see “surface cleaning” section). Some surfaces need to be roughened with medium or coarse sandpaper. Surface to be covered has to be sound, clean, dry, without humidity and non-crumbled. It must be free of any residues such as dust, dirt, efflorescence, oil, paint, glue, sealer or any other foreign materials which could affect bonding. Outdoor surfaces must assure drainage slope and avoid water retention. See complete information on the installation guide joined on every pail. |
| Surface Cleaning |
| Clean with a universal degreaser and use a power washer unit with at least 2400 psi pressure. Clean the surface with slow sweeping movements from left to right holding the tip 10 cm from the surface. A significant difference in cleanliness of the area should be observed using this method. |
| Application |
Stir well before use. CR2300 can be applied by paintbrush, roller, spray gun, squeegee or trowel. |
| Clean Up |
| Clean tools and equipment with soap ang wather. |
| Packaging |
| Available in 3,78 l, 10 l and 20 l. |
| Shelf Life |
| 12 months after purchasing date when kept in its tightly closed original container. Keep from freezing. |
| Coverage |
3,78L / 1 gallon u.s. about 9.29 m²(100 ft²)
10L / 2,5 gallons u.s. about 24.15m²(260 ft²)
18,9L / 5 gallons u.s. about 46.45 m²(500 ft²)
* Covrage dependent of surface porosity and temperature. |
