Condor
CR-20W Plastic Cement Winter Grade Condor™
Description
CR20W is a multi-purpose asbestos free plastic cement especially formulated for low temperature uses. Use to fill holes and cracks on foundations, asphalt roofs, shingles, vent, chimney joints and others. Once dried, it becomes a strong waterproofed coating and resists against bad weather. Can be use to glue back asphalt shingles and protect them against wind.
Surface Preparation

Surfaces must be structurally sound, clean, free of frost, dust, rust, chipped paint, oil, grease and any loose or deteriorated materials.

Application
Apply with a putty knife, a trowel or by main with glove. To fill joints and cracks, push profoundly into gaps making bulge out on surface to avoid accumulation of water. Repair cracks and holes by applying a coat of 3 mm (1/8 in.) thick to the defective sections and overtake of 150 mm (6 in.) around repairs. To stick back shingles, apply only 3 points of 25 mm (1 in.) evenly distributed. To facilitate low temperature applications, keep product in a warm place (if necessary).
Clean up
Clean tools and equipment with mineral spirits.
Package
Avalable in 20 kg
STANDARD
CAN/C.G.S.B. 37.5M-89
Shelf Life
12 months after purchasing date when kept in its tightly closed original container.
Condor
Condor

Technical Data Table

  Specifications
Color Black
Solids by Volume 70 - 80 %
Weight 1,16 kg/L (9,7 pounds/gal)
Coverage 0,32 m²/kg (3,45 ft²/kg) for 3 mm (1/8 in) coat
Dry Time*

To 50 % R.H. 20° C (68° F)

To the Touch* 4 hours
Completely Dry* 48 hours
Service Temperature Maximum : 85° C (185° F) dry coating
Application Temperature Can be apply at low temperature
Chemical Resistance

Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Is not resistant to oils, greases and solvents.

Permeance to Water Vapor (ASTM E96) 3 mm (1/8 in) coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Dry Time dependent of surface porosity and temperature.

Restrictions

If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid solvent infiltration inside. Protect freshly applied product and open container from open flame and adjacent welding activity. For EXTERIOR USE only.

Warranty

The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Trowel Gun
Glove
Knife
WARNING Simdut

EYE AND SKIN IRRITANT

FIRST AID: Skin contact : Wash skin immediately with soap and water. Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.

Clothes contact : Remove contaminated clothes. Inhalation : Move the victim to fresh air. Consult a physician if necessary. Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician. KEEP OUT OF REACH OF CHILDREN

READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 

PDFDownload PDF file format